Pari eflowrapid 178G1005, Instructions For Use Manual

Page: 49 / 330

eFlow
®
rapid - 03/12 45
en
• Press the aerosol chamber and the
medication reservoir together until the
clip on the reservoir engages in the lock-
ing lug of the aerosol chamber:
Fit the medication cap ( 4 ), consisting of
the cap seal with soft sealing collar and
cap:
• Hold the cap (
4b ) with the small opening
upwards and push the cap seal ( 4a )
onto the four locking lugs from below
until it snaps audibly into place.
• Attach the expiratory valve (pre-
assembled, 7a ) in the slot provided for
that purpose in the mouthpiece ( 7 ):
• Insert the mouthpiece ( 7 ) with the expir-
atory valve pointing upwards in the con-
nector to the aerosol chamber:
Note:
If the button closure does not close,
open the nebuliser handset by
lifting the clip and ensure that the in-
spiratory valve is seated correctly.
Note:
Check that the soft collar is fully
extended and without creases.
4a
4b
7a
7
7