background image

27

4. Technical explanation regarding EMD (Electromagnetic Disturbance)

The bed requires special safety precautions regarding EMD (Electromagnetic Disturbance).

Install, operate, and use the bed according to the information provided below.

The bed is intended for use in an electromagnetic environment specified according to “Electromagnetic 

disturbance.” Use of the bed in an unintended environment may cause the problems below.

•  The function for supporting the patient’s weight may not work.

•  The emergency head down function may not work.

WARNING

n

 If  you  use  accessories,  transducers,  or  cables  other  than  those 

specified,  except  for  transducers  and  cables  sold  by  the  bed 

manufacturer,  as  replacement  parts  for  internal  components,  the 

emissions of the bed may increase or its immunity may decrease.

n

 Use portable RF communication devices (including peripheral devices 

such as antenna cables and external antennas) at a distance of at least 

30  cm  (12  in.)  from  all  parts  of  the  bed.  Use  of  RF  communication 

devices within a distance of 30 cm (12 in.) may cause a decline in the 

performance of the bed.

n

 The bed cannot be used adjacent to other devices or in a stacked state. 

If you must use the bed adjacent to other devices or in a stacked state, 

make  sure  that  the  bed  operates  properly  in  the  location  where  it  is 

used.

The bed is intended for use in physician’s offices, clinics, exclusive medical facilities, independent 

surgery  centers,  multiple  treatment  facilities,  and  hospitals  (except  near  high-frequency  surgical 

equipment and outside RF shielded rooms for magnetic resonance images). The customer or user of 

the bed must use the bed in an environment specified here.

Due  to  its  emission  characteristics,  the  bed  is  suitable  for  use  in  hospitals.  If  used  in  a  home 

environment,  this  product  may  not  offer  sufficient  protection  against  radio  frequency 

communication  services.  It  may  be  necessary  for  the  user  to  take  relaxation  measures  such  as 

re-installing or changing the direction of the product.

No.

Cable

Maximum length [m]

Remark

1

Bed link cable

0.65

Not shielded

2

Operation panel cable

2.0

Not shielded

8

 REFERENCE INFORMATION

Summary of Contents for cococia Riraku flow

































Reviews: