The mattress can be operated using the BED Navi attached to the bed and a separately sold operation panel (accessory).
9
Sheet
Sheet end
Sheet stopper
1
Cover with a sheet.
3
Pull the sheet
toward the
outer side.
2
Insert the
sheet end.
1
When the product has expanded, see the figure on the left and
then cover the top and sides of the air mattress with a sheet.
* Use a towel, mattress pad, etc. as needed.
2
Insert the ends of the sheet into the sheet stoppers located at
the four corners on the underside of the mattress.
3
Firmly pull the ends of the sheet from the inner side to the
outer side so that they will not come loose.
Note
!
Do not use the sheet stoppers for any purpose
other than as sheet stoppers.
5. Making the bed
Towel, mattress pad, etc.
4
FUNCTIONS AND OPERATING PROCEDURES
1. Names and functions of operation panel parts
1
Max. inflate mode button
page 13
2
Power lamp
• Lit in green: Operating
• Lit in orange: Minor error
page 21
• Flashes in orange: Major error
page 21
3
Status display screen
Displays information such as the operation status and
various setting statuses of the product.
4
Adjustment buttons
Sets the mattress width or softness.
5
Back support (BS) button
page 11
6
Automatic softness control button
page 11
7
Alternating pressure button
page 12
8
Dehumidify button
page 12
9
Operation sound button
page 12
0
Preparing indication
This is lit during internal pressure adjustment with fast
inflation.
a
Small flow (SF) button
page 12
b
Setting button
page 10
2
3
4
5
b
6
7
8
9
0
a
1
Using the operation panel (accessory)
3
INSTALLATION PROCEDURE
