background image

Preface

Thank you for purchasing the 

Alternating pressure air flotation mattress cococia Riraku flow (hereinafter referred to as 

the product)

.

 

z

Before using the product, please read this instruction manual to fully understand the safe and proper operating procedures. 

In addition, attendants and caregivers should also read this instruction manual.

 

z

Store this instruction manual in a place that can be easily accessed for later reference.

 

z

Users and/or carers are requested to report information about any serious incident related to this air mattress that occurs 

within the EU to the manufacturer and the regulating authority of the member country of residence.

 

z

‘Serious incident’ means any incident that directly or indirectly leads, might have led or might lead to any of the following: 

a) the death of a user, carer or other person. 

b) the temporary or permanent serious deterioration of a user’s, carer’s or other person’s state of health. 

c) a serious public health threat.

 

z

Some of the descriptions in this instruction manual may differ from the product you have purchased due to model improvements.

 

z

Values described for the operating range, dimensions, angles, and weights are subject to normal manufacturing tolerances. 

Except for special cases, words such as approximately and about are omitted in this instruction manual to improve readability.

 

z

If you have any questions, please contact Paramount Bed or your distributor.

Intended Use

cococia Riraku flow is an air mattress with an internal pump, which is designed to disperse the body pressure to prevent pressure 

ulcers in medical and elderly care facilities. Its operation panel, an accessory for cococia Riraku flow, is intended to operate the 

alternating pressure air flotation mattress.

Note:

Patient target group: Persons weighing 20 to 180 kg who are at least 13 years of age

 

Persons requiring a function to disperse pressure applied to the body

Clinical benefit: 

Body pressure dispersal to reduce the risk of pressure injury

Intended users: 

Medical professionals and maintenance staff

*  Consult with an expert, such as a doctor, nurse, or care counselor to prevent pressure ulcers. Pressure ulcers cannot be pre-

vented by the product alone. Full body control (such as nutritional status control or underlying disease control) is required.

*  The product is one of the tools for general prevention of pressure ulcers. It is not intended to be used with a view to treatment or 

alleviation of on-going pressure ulcers. It does not eliminate the need of posture change, either. Provide appropriate care such 

as changing posture during the use of the product.

Alternating pressure air flotation mattress

cococia Riraku flow

CONTENTS

1

 SAFETY PRECAUTIONS

 



1

2

 PART NAMES

 



3

3

 INSTALLATION PROCEDURE

 



4

4

 FUNCTIONS AND OPERATING 

 

PROCEDURES

 



9

5

 MAINTENANCE AND INSPECTION

 



18

6

 TROUBLESHOOTING 

 



21

7

 LONG-TERM STORAGE AND 

 

TRANSPORTATION

 



23

8

 REFERENCE INFORMATION

 



24

AFTER-SALES SERVICE

 



31

7F13042000A1

INSTRUCTION 

MANUAL

Summary of Contents for cococia Riraku flow

































Reviews: