8. Setting Up NetScout Manager Plus for FrameSaver Devices
9123-A2-GB20-20
August 2001
8-9
4. Click on the ... button to the right of indicated fields for a drop-down list from
which selections can be made. Minimally, configure the following fields:
5. Select the OK button (at the bottom of the screen) to add this alarm.
6. Repeat Steps 3 through 5 until all traps are configured for all DLCIs.
Refer to
Configuring Alarms in
the
NetScout Manager/Plus & NetScout Server
Administrator Guide
for additional information.
Field
Select or Enter . . .
Domain
User Defined
DLCI
DLCI number for trap being assigned
Stats Type
PARADYNE
Trap Variable
Trap variable to be configured
Key1
The ifIndex for the frame relay logical interface is 1
Key2
DLCI number (same as DLCI above)
Type
Absolute or Delta radio button
1
Rising, Falling, or Both radio button
2
Threshold
Value that will trigger a trap.
1
Latency MIB variables should be Absolute; all others should be Delta.
2
Generally, Rising is selected.
Summary of Contents for FrameSaver FLEX 9123
