Paradyne FrameSaver FLEX 9123, User Manual

Page: 235 / 280

B. SNMP MIBs and Traps, and RMON Alarm Defaults
9123-A2-GB20-20 August 2001
B-7
Trap: warmStart
This trap indicates that the FrameSaver unit has been reset and has stabilized.
Trap: authenticationFailure
This trap indicates that access to the FrameSaver unit was unsuccessful due to
lack of authentication.
Table B-3. warmStart Trap
Trap What It Indicates Possible Cause
warmStart FrameSaver unit has just
reinitialized and stabilized
itself.
„
Reset command sent.
„
Power disruption.
String:
‘Unit reset.’
Variable-Binding
devLastTrapString
(devHealthAndStatus.mib)
Table B-4. authenticationFailure Trap
Trap What It Indicates Possible Cause
authenticationFailure Access to the FrameSaver
unit was attempted and
failed.
„
SNMP protocol message not
properly authenticated.
„
Three unsuccessful attempts
were made to enter a correct
login user ID/password
combination.
„
IP Address security is enabled
and a message was received
from the SNMP Manager
whose address was not on the
lost of approved managers.
String:
‘Unauthorized access attempted.’
Variable-Binding
devLastTrapString
(devHealthAndStatus.mib)