manualshive.com logo in svg

Paradyne FrameSaver FLEX 9123, User Manual

Share
Download
Paradyne FrameSaver FLEX 9123 User Manual Download Page 190

7. Setting Up OpenLane for FrameSaver Devices and Activating SLV Capability

7-6

 

 August 2001

9123-A2-GB20-20

Administering and Managing FLEX SLV Activations

The OpenLane SLM system provides the following features that allow you to 
administer and manage your Activation Certificates and FLEX SLV activations. 
From the Firmware/Feature Maintenance menu, you can:

„

Add or view the status of activations, and see how many activations remain on 
each certificate.

„

Schedule when activations are to take place, and verify that the activations 
occurred as scheduled.

„

View activations that are scheduled, cancel activations, or change the 
FrameSaver devices that are scheduled for activation, as needed.

„

Generate and print a report that summarizes the activity on all Activation 
Certificates in your system, which includes the number of activations ordered, 
the number of activations remaining on the certificate, and the date the 
certificate was ordered. 

The report also includes information about each activated unit: its system 
name, IP address, location, model, serial number, and date of activation.

The sections that follow describe what you need to do to get Activation Certificate 
information into your OpenLane SLM system, and to activate FLEX SLV capability 
in basic FLEX units.

Summary of Contents for FrameSaver FLEX 9123

























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands