Paradyne FrameSaver FLEX 9123, User Manual

Page: 120 / 280

5. Operation and Maintenance
5-10
August 2001 9123-A2-GB20-20
No Primary
Destination Link DLCIs
Available New or Modify was selected
from the PVC Connection
Table, but even though
DLCIs are available to form
a connection, no DLCIs are
available on the network
link, which is a suitable
Primary PVC Destination. Configure additional DLCIs for the
network link and try again.
If a network DLCI has been
entered as a Source DLCI:
1. Change the Source DLCI to a
user data port DLCI.
2. Enter the network DLCI as the
PVC’s Primary Destination.
No Security Records
to Delete Delete was selected from
the Administer Login
screen, and no security
records had been defined.
„
No action is needed.
„
Enter a security record.
Password Matching
Error – Re-enter
Password Password entered in the
Re-enter Password field of
the Administer Logins
screen does not match what
was entered in the
Password field.
„
Try again.
„
Contact your system
administrator to verify your
password.
Permission Denied
(Seen at an FTP
terminal.)
A file transfer was
attempted, but the:
„
User did not have
Level 1 security.
„
See your system administrator
to get your security level
changed.
„
Wrong file was specified
when the put command
was entered.
„
Try again, entering the correct
file with the put command.
„
User attempted to
upload a program file
from the unit.
„
Enter the put command
instead of a get command; you
can only transfer files to the
unit, not from it.
See Upgrading System
Software
on page 5-42.
Please Wait Command takes longer
than 5 seconds. Wait until message clears.
Port Inactive The port is disabled, or it
supports synchronous data
and is configured for leased
line mode when a DTE
Loopback was started. No action is needed.
Resetting Device,
Please Wait ... Yes (or y) was entered in
the
Reset COM Port
usage
field of the System
Paused menu.
No action is needed.
Table 5-5. Device Messages (4 of 5)
Message What It Indicates What To Do