Paradyne FrameSaver FLEX 9123, User Manual

Page: 213 / 280

9123-A2-GB20-20 August 2001
9-1
9
Setting Up Network Health for
FrameSaver Devices
FrameSaver units are compatible with Concord Communication’s Network Health
software.
For FrameSaver units with the SLV and SLM reporting feature set, Network Health
has released the first in a series of software modules that integrate FrameSaver
SLV enhanced performance statistics into its reporting package (see the example
in
FrameSaver SLV Plus At-a-Glance Report on page 9-9). To get this report, you
need Network Health R4.01 or higher.
This chapter includes Network Health information as it relates to FrameSaver
FLEX devices. It includes the following:
„
Installation and Setup of Network Health on page 9-2 and reports
„
Discovering FrameSaver Elements on page 9-3
„
Configuring the Discovered Elements on page 9-4
„
Grouping Elements for Reports
on page 9-5
„
Generating Reports for a Group on page 9-6
— About Service Level Reports
— About At-a-Glance Reports
—
About Trend Reports
— Printed Reports
„
Reports Applicable to FLEX and SLV Devices on page 9-7
For additional information about installing, accessing, and managing FrameSaver
FLEX devices through Concord’s Network Health, and for information about
applicable reports, refer to:
„
Network Health Installation Guide to help you install the application.
„
Network Health User Guide
to help you get started using the application.
„
Network Health Reports Guide to help you understand and use Frame Relay
reports.
„
Network Health – Traffic Accountant Reports Guide to help you understand
and use Traffic Accountant reports.