SDCP Operation
3-36
3166-A2-GB20-20
March 1999
Establishing Access Security on the COM Port
Although the password feature is available, it is not required as a factory default.
If used, it ensures access security before device control is passed to a device
connected to the COM port. The default is None. The password itself is set
separately (refer to the following section,
Setting a Password
).
Procedure
To establish access security on a port:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
key until the User selection appears on
the screen.
5. Select User.
F1
Edit:
Chan
Gen
User
F2
F3
6. Press F1 (Next) until the Password configuration option appears.
7. Select Com if it to receive password control.
F1
Password:None
Next
None
Com
F2
F3
Summary of Contents for 3166 CSU
