Paradyne 3166 CSU, User Manual

Page: 52 / 207

SDCP Operation
3-26
3166-A2-GB20-20 March 1999
9. Use the and keys to position the cursor under the character you want
to change. Press F1 (Up) or F2 (Down) to scroll through the valid
numbers/characters for the text string.
F1
public
Up
Down Save
F2
F3
The F1 (Up) key scrolls through the ASCII character set in the following
order: numbers (0 –9), lowercase letters (a–z), uppercase letters (A–Z),
space character, ASCII symbols (ascending order, based on ASCII code),
and the End of Line symbol (
←
). The
←
erases all characters to the right of
the cursor.
10. When you are through changing the community name, you must press F3
(Save) to save the value. Otherwise, the original value will be retained.
11. Press F1 (Next) until the Access 1 configuration option appears.
12. Press F2 (Read) or F3 (R/W).
F1
Access 1:
Next
Read R/W
F2 F3
The Read selection allows read-only access (SNMP “Get”) to the accessible
objects in the MIB when community name 1 is used. The R/W selection
allows Read/Write access (SNMP “Get” and “Set”) to the objects in the MIB.
Write access is allowed for all objects specified as read/write in the MIB.
Read access is allowed for all objects specified as read-only or read/write.