Paradyne 3166 CSU, User Manual

Page: 63 / 207

SDCP Operation
3-37
3166-A2-GB20-20 March 1999
Setting a Password
In addition to establishing access security on a port (refer to the previous section,
Establishing Access Security on the COM Port
) the password itself is set. Unless
you specify otherwise, the password is null.
Procedure
To set a password:
1. From the top-level menu screen, press the key until the Ctrl selection
appears on the screen.
2. Select Ctrl.
3. From the Control screen, press the key until the Passwd selection
appears on the screen.
4. Select Passwd.
F1
Control:
Reset CID Passwd
F2 F3
5. Use the and keys to position the cursor under the desired character.
You must enter a character before the moves the cursor to the next
space to the right.
F1
Passwd:
xxxxxxxx
Up Down Save
F2 F3
6. Enter the desired password. Press F1 (Up) and F2 (Down) to scroll up and
down through the valid characters/numbers for the password. Valid password
characters are 0–9, a–z, A–Z, #, –, ., and /. Press F3 (Save) to save the
password.
F1
Passwd: xxxxxxxx
Up Down Save
F2 F3