23
digit represents the Communication Format for Central Station Telephone Number 2. Below you will
find a brief description of all available Communicator Formats.
[
ENTER
]
+
Installer Code
+
[10] [3] [8]
+
First digit =
(Central Station Telephone #1) +
Second digit =
(Central Station Telephone #2) +
[
ENTER
]
6.5.1 Ademco Contact ID (all codes)
Please note that this format must use a 4-digit system account code (see section 6.4).
Ademco Contact ID is a fast communicator format that uses tone transmission instead of
pulse transmission. This communicator format also uses a pre-defined list of industry
standard messages and event codes that should suit most of your basic installation needs.
Using the "All Codes" format, the control panel will automatically generate the Contact ID
event codes (see table 5 below) for every event in addresses 300 to 527. Therefore, you do
not need to program addresses 300 to 527.
6.5.2 Ademco Contact ID (programmable codes)
Please note that this format must use a 4-digit system account code (see section 6.4). Ademco
Contact ID is a fast communicator format that uses tone transmission instead of pulse
transmission. Use the Ademco Contact event list of industry standard messages and event codes
found in the programming guide to program the desired event codes into addresses 300 to 527.
Event Reporting
Summary of Contents for Esprit 748
