Panasonic YD-500GP5, Operating Instructions Manual

Page: 32 / 64

Connection
28
The functions that support the configuration of the welding machine are as follows
Function
Configurable parameters Function Description Note
Select networking
mode and set
networking
parameters
Ethernet
、
WIFI
、
GPRS
●
Both Ethernet and GPRS networking
modes are enabled by default
●
The two networking methods of Ethernet
and WIFI cannot be enabled at the same
time
●
The two networking methods of Ethernet
and WIFI cannot be enabled at the same
time
●
If GPRS is disabled, iWeldCloud function
will be invalid
●
If you choose to disable the LAN, the two
networking methods of Ethernet and WIFI
will be invalid, and the iWeld software
cannot be connected.
The export
version only
has Ethernet.
Modify the sampling
frequency of the
welder
0.2s
、
0.5s
、
1s
●
Set the real-time data upload frequency of
the welding machine
The export
version only
has 1s.
Set connection
parameters
Welder password, welder
address, communication
method
●
The welding machine password needs to
be consistent with the PLC special machine
password
●
The welding machine address needs to be
consistent with the welding machine
address in the PLC
●
There are two communication methods:
RS485 and RS422
Server certificate and
URL Set up the certificate
required to communicate
with the device server URL and certificate must be configured at
the same time. Improper configuration may
cause iWeldCloud function failure Only use this
function
when the
device server
changes