68
6. Press the ENTER or CAM (SET) button again.
The specified recorder number and unit number will be
set for the selected HDD-unit map.
“Memory” will appear on the LCD for a few seconds,
and the LCD display will return to Step 1.
To delete a HDD-unit map
1. Perform Step 1 and 2 in p. 67.
2. Press the CLEAR button.
“Clear OK?” will appear on the LCD.
Note:
To cancel deleting the setting, press the EXIT or
MON (ESC) button.
3. Press the ENTER or CAM (SET) button.
The HDD-unit map will be deleted.
“Erased” will appear on the LCD for a few seconds, and
the LCD display will return to Step 1.
Note:
After all the HDD-unit maps have been deleted,
“HDD00” will appear for the camera channel area.
“HDD-Unit Map Check” menu will appear on the
LCD.
●
LCD Title Editing
You can edit button function titles displayed on the LCD.
If you set LCD titles related to the registered button func-
tions, controllability will be improved.
1 .Display “LCD Title” sub menu. (Refer to Step 1 to 4 of
p. 51 To Recall Menu Functions.)
2. Select a desired title group (F1-F4 or F5-F8) by rotating
the shuttle ring or moving the 3D joystick.
3. Press the ENTER or CAM (SET) button.
The title editing form will appear on the LCD.
4. Select desired characters by performing either of the
following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
Notes:
• To move the cursor, rotate the shuttle ring (clock-
wise or counterclockwise) or move the 3D joystick
(to the right or left)
• To delete a character, press the CLEAR button.
• To display the next or previous character group,
rotate the JogDial while holding down the SHIFT
button.(For example, when the cursor is pointed on
“C”, “a” can be displayed by rotating the JogDial
clockwise while holding down the SHIFT button.)
• The following diagram describes the available char-
acters.
Character group Characters
Space
“”(Space)
■
Capital letters
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Small letters
abcdefghijklmnopqrstuvwxyz
Numerics
0123456789
Symbols
!”#$%&’()
∗
+,–./:;<=>?[¥]^_{|}
→←
@
5. Press the ENTER or CAM (SET) button.
“Set OK?” will appear on the LCD.
Note:
To cancel the setting, press the EXIT or MON
(ESC) button. The LCD display will return to Step 4.
6. Press the ENTER or CAM (SET) button again.
The LCD title you have edited will be registered.
“Memory” will appear on the LCD for a few seconds,
and the LCD display will return to Step 1.
LCD Title F1-F4 410
F1 F2 F3 F4
When "F1 — F4" is selected
LCD Title F1-F4 410
Set OK?
LCD Title F1-F4 410
Memory
LCD Title F1-F4 410
F5 F6 F7 F8
When "F5 — F8" is selected
HDD-Unit Map 409
HDD06 Memory
HDD-Unit Map 409
HDD06 Clear OK?
HDD-Unit Map 409
HDD06 Erased
LCD Title 410
F1-F4 F5-F8
Summary of Contents for WVCU650 - SYSTEM CONTROLLER ADDENDUM
Page 77: ...77 ...
