66
6. Select a desired preset position number by performing
either of the following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
Note:
You can select a preset position number from 1
to 64.
7. Press the ENTER or CAM (SET) button.
“Set OK?” will appear on the LCD.
Note:
To cancel the setting, press the EXIT or MON
(ESC) button. The LCD display will return to Step 6.
8. Press the ENTER or CAM (SET) button again.
The specified camera channel and preset position num-
ber will be set for the selected camera position.
“Memory” will appear on the LCD for a few seconds,
and the LCD display will return to Step 1.
To delete a camera position
1. Select a camera position to delete by performing either
of the following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
2. Press the CLEAR button.
“Clear OK?” will appear on the LCD.
Note:
To cancel deleting the camera position, press the
EXIT or MON (ESC) button.
3. Press the ENTER or CAM (SET) button.
The camera position will be deleted.
“Erased” will appear on the LCD for a few seconds, and
the LCD display will return to Step 1.
●
Associating Camera Numbers with
Unit Numbers
You can register camera-unit maps (the association of cam-
era numbers and unit numbers). Up to 256 camera unit
maps can be registered. You can select a camera by enter-
ing the camera channel alone, even if the camera is con-
nected to system unit not currently selected.
Note:
If “Enable” is selected in Step 2, you can select only
camera numbers associated with unit numbers.
1. Display “Cam-Unit Map” sub menu. (Refer to Step 1 to
4 of p. 51 To Recall Menu Functions.)
Note:
To disable camera-unit maps, display the “
s
”
mark beside “Disable” by rotating the shuttle ring
counterclockwise or moving the 3D joystick to the
left.
2. Press the ENTER or CAM (SET) button.
The camera-unit setting will appear on the LCD.
3. Select a desired camera channel by performing one of
the following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
• Enter the camera number with the numeric buttons.
Notes:
• To register a new position number, press the
numeric buttons.
• You can select a camera channel from 1 to 256.
• The following are the factory default settings.
Default settings of camera-unit maps
Cam
Unit
001 to 016
01
017 to 032
02
033 to 048
03
049 to 064
04
065 to 256
– –
4. Rotate the shuttle ring clockwise or move the 3D joy-
stick to the right. The cursor will jump to the next item.
Cam Posi Map 407
Cam-P016 Erased
Cam-Unit Map 408
Disable Enable
Cam-Unit Map 408
Disable Enable
Cam-Unit Map 408
Cam001 Unit01
Cam-Unit Map 408
Cam016 Unit01
Cam Posi Map 407
Cam-P016 C005 Pre32
Cam Posi Map 407
Cam-P016 Set OK?
Cam Posi Map 407
Cam-P016 C005 Pre32
Cam Posi Map 407
Cam-P016 Clear OK?
Cam Posi Map 407
Cam-P016 Memory
Summary of Contents for WVCU650 - SYSTEM CONTROLLER ADDENDUM
Page 77: ...77 ...
