82
4
■
Operator Menu
The operator menu allows access to two items: the level table and operator registration.
To select an item from the
Operator Menu
:
1. Select the desired item by moving the Joystick Controller.
2. To execute the selection, press the
CAM (SET)
key.
The selected menu appears on the monitor.
3. To return to the Set Up Menu, press the
MON (ESC)
key.
●
Level Table
This table is used to determine what setup functions and operations may be performed by the 5 operator levels.
There is a total of 23 functions or operation items available in the table.
To program or edit a Level Table, do the following:
1. Move the cursor to position 3 by moving the Joystick Controller, then press the
CAM (SET)
key to execute the selection.
2. Move the cursor to position 4 by moving the Joystick Controller.
Press the Function
F4
button to open the Pop Up Window.
Select the desired level by moving the Joystick Controller, and then press the
CAM (SET)
key to execute the selection.
m
:
Enables the functions or operations.
]
:
Disables the functions or operations.
3. Repeat the above procedures until all items are programmed.
4. After completing level assignment, press the
MON (ESC)
key to escape from the programming mode. The cursor returns
to position 3.
U p
L e v e l
O p e r a t o r
F 1 : - -
F 2 : - -
F 3 : - -
F 4 : - -
S e t
O P E .
R e g i s t r a t i o n
T a b l e
S e t
U p
F 1 : - -
F 2 : - -
F 3 : - -
F 4 : P o p
O P E .
L e v e l
L e v e l
T a b l e
S e t
1
U p
P - S E Q
. . O K
. . N G
S e t
U p
U p
M e n u
T - S E Q
G - S E Q
T i m e r
A l a r m
O p e r a t o r
C a m e r a
C o n t r o l l e r
E X T
C O M P / V D 2
C o m m u . S p e e d
C l o c k
T i m i n g
T i t l e
O p e r a t i o n
C A M
S e l e c t
P - S E Q
S e l e c t
T - S E Q
S e l e c t
G - S E Q
S e l e c t
A l a r m
A C K / R S T
P r i o r i t y
L o c k
2
3
4
5
1
2
3
4
5
A u t o C l e a n i n g
M O N I i n
S e l e c t
R S - 4 8 5 S i t e
q
w
e
r
C a m e r a S e t U p
Summary of Contents for WVCU550C - SYSTEM CONTROLLER UNIT
