manualshive.com logo in svg

Panasonic WVCU550C - SYSTEM CONTROLLER UNIT, Operating Instructions Manual

Share
Download
Panasonic WVCU550C - SYSTEM CONTROLLER UNIT Operating Instructions Manual Download Page 106

111

5

5. Press the 

STOP

button to pause a Group Sequence

that is being run on the assigned monitor.

6. Press the 

FORWARD SEQ 

button to restart a Group

Sequence forward from the step that was previously
paused by pressing the STOP button.

7. Press the 

BACK SEQ 

button to restart a Group

Sequence backward from the step that was previously
paused by pressing the STOP button.

8. Press the 

INC +1CAM

button to move the sequence

one frame to the next step (in forward or reverse run
direction) from the step that was previously paused by
pressing the STOP button.

STOP

G-Seq   01 Stop
Monitor 16 

FORWARD

SEQ

G-Seq   01
Monitor 16 

BACK

SEQ

G-Seq   01
Monitor 16 

INC

+1CAM

G-Seq   01 Stop
Monitor 16 

9. Press the 

DEC  –1CAM 

button to move the sequence

one frame to the previous step (in forward or reverse
run direction) from the step that was previously paused
by pressing the STOP button.

10. Press the 

FORWARD SEQ 

button while the 

ALT

indi-

cator is on to restart the sequence forward from the
beginning of the sequence step that was previously
paused by pressing the STOP button.

11. To return to Spot monitoring, select a camera.

Refer to the Camera Selection.

DEC

-1CAM

G-Seq   01 Stop
Monitor 16 

SEQ

ALT

FORWARD

Summary of Contents for WVCU550C - SYSTEM CONTROLLER UNIT



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands