manualshive.com logo in svg

Panasonic WVCU550C - SYSTEM CONTROLLER UNIT, Operating Instructions Manual

Share
Download
Panasonic WVCU550C - SYSTEM CONTROLLER UNIT Operating Instructions Manual Download Page 5

6

FEATURES

PREFACE

The WJ-SX550C Matrix Switcher, when combined with the
optional WV-CU550C System Controller and WJ-AD550
Extension Unit, allows for flexible control of 128 cameras
and 16 monitors.

Tour and Group sequences for customized security
requirements can be easily established through the user-
friendly, on-screen menu setup.
Thanks to its modular construction, the WJ-SX550C allows
for flexible expansion to meet future needs.

The WJ-SX550C Matrix Switcher, when combined with the
WV-CU550C System Controller and WJ-AD550 Extension
Unit, enables control of the following functions: 

• Routing of up to 128 cameras to any one of 16 moni-

tors.

• Remote control of up to 128 cameras and auxiliary

equipment by using optional receivers and acces-
sories, including:

1. Remote control of Pan-Tilt Head and Camera

Housing.

2. Remote control of Motorized Zoom Lenses: Focus,

Zoom and Iris.

3. Remote control of camera setting, including

Electronic Sensitivity Up, Electronic Shutter,
Electronic Zoom, and more.

Additional features of the WJ-SX550C include:

Versatile Camera Switching Modes

• Independent programmable sequence for each moni-

tor (16 programs)

• 32 tours including Dwell Time, Camera Preset Position

and Auxiliary Controls for any monitor.

• 8 group synchronized sequences including Dwell Time,

Camera Preset Positions and Auxiliary Controls

• Any tour or group synchronized sequence can be

selected by operators manually. If Alarm and Time
Event schedule are set up, the sequence activates
automatically.

Flexible Alarm Activation

• Alarm Mode 1: Any alarm is displayed on one designat-

ed monitor, and one associated Time Lapse VCR is
switched to real time mode.

• Alarm Mode 2: Any alarms are displayed on the four

designated monitors, and four associated Time Lapse
VCRs are switched to real time mode.

• Alarm Mode 3: Any alarms are displayed on any moni-

tors, together with sequence routines and presets.
Alternatively, any Tour or Group sequence can be
assigned to any monitor or group of monitors.

Programmable System Partitioning and Priority

• Operator Registration: 5 operator access levels to sys-

tem for setup and operation.

• Password protection to limit operators' access to sys-

tem.

• Operator priority to lock out access by lower priority

operators.

Summary of Contents for WVCU550C - SYSTEM CONTROLLER UNIT



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands