126
5
■
Log-Out
This function is used when an operator is leaving the con-
troller, or no longer requires access to the system.
1. Select the Log-Out
(A4)
Menu by pressing the appro-
priate Direction button.
2. Press the Function
(F4)
button to log out. The LCD dis-
play shows the Log-in Display.
• Auto Log-in Setting
If the Auto Log-in setting is set to On mode, any opera-
tor can Log-in automatically as any operators previous-
ly.
The auto log-in function may not work, if a previous
operator has not logged out properly.
Select On or Off mode to meet system requirements.
1. Select the Log-Out
(A4)
Menu by pressing the appro-
priate Direction buttons.
2. Press the Function
(F3)
button to toggle the Auto Log-in
On and Off mode.
F 1
F 2
F 3
F 4
PriorityLock
On Off
P
Auto Log-Out
Log-in
A4
F 1
F 2
F 3
F 4
PriorityLock
On Off
P
Auto Log-Out
A4
Auto
Auto
On:
Off:
Summary of Contents for WVCU550C - SYSTEM CONTROLLER UNIT
