manualshive.com logo in svg

Panasonic WVCU550C - SYSTEM CONTROLLER UNIT, Operating Instructions Manual

Share
Download
Panasonic WVCU550C - SYSTEM CONTROLLER UNIT Operating Instructions Manual Download Page 101

106

●

Direct Preset Setup

The following function requires the use of cameras
equipped with the specific feature.
This function enables registering of preset position number
without opening the camera setup menu.

1. Select the desired monitor and camera.

Refer to the Monitor Selection and Camera Selection.

2.

Move the camera to the preset position to be regis-

tered by moving the Joystick Controller and ZOOM,
FOCUS Controls.

3. Select the PrePOSI Setup 

(B5)

Menu on the LCD dis-

play by pressing the Direction buttons.

4. Select the desired preset position number by pressing

the Numeric keys, then press the Function 

(F1) 

button

to register the position.

Note:

If the position number entered has been regis-

tered previously, the old position will be overwritten
by the new one.

2

3

4

5

6

7

8

9

MON

CAM

ESC

SET

0

1

PrePOSI SetUp
 Set

B5

F 1

F 2

F 3

F 4

●

Patrol Learn and Play

The following function requires the use of cameras
equipped with the specific feature.
A routine of manual operations can be stored for a specific
time and later reproduced repetitively.

1. Select the desired monitor and camera.

Refer to the Monitor Selection and Camera Selection.

2. Select the Patrol Learn 

(B4)

Menu on the LCD display

by pressing the Direction buttons.

3. Press the Function 

(F2)

button to start Patrol Learn .

“LEARNING” appears on the active monitor.

4. Operate the camera manually. Operations data is

stored.
The stored data is as show below.
Pan/Tilt, Lens Iris, Focus, Zoom and Preset Position

5. Press the Function 

(F3)

button to end the storage.

To reproduce the stored data, follow the procedure shown
below.

1. Select the desired monitor and camera.

Refer to the Monitor Selection and Camera Selection.

2. Select the Patrol Learn 

(B4)

Menu on the LCD display

by pressing the Direction buttons.

3. Press the Function 

(F1)

button to reproduce the stored

Patrol function.

4. Press the Function 

(F3)

button to end the reproduction.

PatrolLearn        
 Play Learn Stop

F 1

F 2

F 3

F 4

B4

PatrolLearn        
 Play Learn Stop

F 1

F 2

F 3

F 4

B4

5

5

Summary of Contents for WVCU550C - SYSTEM CONTROLLER UNIT



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands