369
DP-2330/3030
MAR 2005
Ver. 2.1
DP-2310/3010
(50) Route the
PTC-AC Harness 3
to the lower
section of the frame as illustrated.
(51) Close the
Rear Cover
.
(52) Remove the Lower Rear Cover.
(Refer to 2.2.6. of the Service Manual)
(53) Remove 2
Screws
.
(54) Remove the
HP Cover
.
(55) Install the
RLB PC Board
onto the HP Cover.
(56) Secure the
RLB PC Board
with 3 Screws
(XTW3+6LFC).
(57) Install the
Power Switch
onto the HP Cover.
Note:
Ensure that the direction of the Power Switch is
correct as illustrated.
(58) Connect the
Harness
of RLB PC Board to the
Power Switch.
(59) Connect the
RLB Harness
to the RLB PC Board
(CN171).
(60) Insert the
RLB Harness
to the Harness Clamp.
Summary of Contents for Workio DP-3030
