Panasonic Workio DP-3030, Service Manual

Page: 171 / 486

171
DP-2330/3030
MAR 2005
Ver. 2.1
DP-2310/3010
4.9.3. Error Message Appears on the PC
4.9.4. Error Message Appears on the Unit
4.9.5. System Error (CD Drive Related Error During Installation)
Error Message Possible Solution(s)
Network Print DLL Error. • Check if the Panasonic Device is turned "On" and the 10Base-T/
is 100Base-TX cable properly connected.
• Printer Properties may be incorrectly configured. (i.e. Printer Port)
Network Port is Busy. • The Panasonic Device may be processing someone’s print job,
please wait and try again later.
• The Panasonic Device is either Transmitting or Receiving an email.
Cannot print because an error is
found in the current printer
setting. • Verify and specify the paper size or orientation to coincide with the
application and the printer driver settings.
Error Message Possible Solution(s)
• The available Sort Memory in the Panasonic Device may not be
enough.
Either install an optional Sort Memory or change the
resolution to 300 dpi in the Printer Driver Properties dialog box.
• The print settings may not be matched for the system.
Change the printing settings in the Printer Driver Properties
dialog box.
i.e. Multi-sized printing.
Cannot complete print job
Image memory overflow
Cannot print
System error
Cannot complete
Confirm print condition
• Change the resolution to 300 dpi in the Printer Driver properties
dialog box.
Problem Possible Solution(s)
Cannot read the drive. • Insert the CD into the drive and click “Retry”.