Panasonic Workio DP-3030, Service Manual

Page: 202 / 486

202
DP-2330/3030
MAR 2005
Ver.2.1
DP-2310/3010
F9 Unit
Maintenance 06 RAM
Initialize
00 Parameter Initialize Resets the Fax and Function
parameters to default values.
Note: Turn the Power Switch to the OFF
and back to the ON position to enable
the parameter settings.
01 All Job Clear Clears all Jobs stored in Flash Memory.
02 Not Used
03 Shipment Set
Clears All Jobs, All Preset Data,
Parameter Initialize & Resets the
Counters (Fax).
04 LBP Fuser Reset Clears the LBP fuser error.
05 Dept. Counter Clear
07 Firmware
Update
00 Update from F-ROM
Master Card
Updates the firmware in the machine
with the Master Firmware Card.
01 Update from USB Updates the firmware in the machine
with the USB.
08 Program
Backup
(Refer to
Sect. 3.7.)
00 Main Onboard F-ROM 4MB
01 Option 1 all Slot 1 FRM8 PCB 8MB
02 Option 1 a Slot 1 FRM8 PCB 4MB (a)
03 Option 1 b Slot 1 FRM8 PCB 4MB (b)
04 Option 2 all Slot 2 FRM8 PCB 8MB
05 Option 2 a Slot 2 FRM8 PCB 4MB (a)
06 Option 2 b Slot 2 FRM8 PCB 4MB (b)
09 Update Program Card Creates a Master Firmware Card using
the Firmware Update Kit. A 4MB or 8MB
Flash Memory Card will be required
depending upon the model.
10 Program
Copy
00 From card to slot 1 Configuration for Program copy.
01 From card to slot 2
02 From slot 1 to card
03 From slot 1 to slot 2
04 From slot 2 to card
05 From slot 2 to slot 1
11 Parameter Backup Backup the Parameter.
12 Parameter Restore Restore the Parameter.
13 Page Memory Size Displays the page memory size (MB).
14 Sort Memory Size Displays the sort memory size (MB).
F9 Mode
Service
Mode
Item Remarks