Panasonic WJ-ND400K Installation Manual Download Page 7

Page: 7 / 64

System requirements for a PC

It is recommended to operate this unit using a PC that meets the following system requirements.
OS:

Microsoft

Windows Vista

Business SP1 (32-bit)

Microsoft

Windows

XP Professional SP2, SP3*

Microsoft

Windows

XP Home Edition SP2, SP3*

OS Language:

English, French, Spanish, German, Italian, Russian, Chinese

CPU:

Pentium

4 3.0 GHz or faster

Memory:

1 GB or more (512 MB or more is required when using Microsoft

Windows

XP.)

Monitor:

Resolution: 1 024 x 768 pixels or more

Color: 24-bit True color or better

Network interface:

10/100/1 000 Mbps Ethernet port x1

Web Browser:

Windows

Internet Explorer

7.0

Microsoft

Internet Explorer

6.0 SP2, SP3*

Audio interface:

Sound card (when using the audio function)

Other:

CD-ROM drive: It is necessary to refer to the operating instructions and use the software on the provid-
ed CD-ROM.

DirectX

9.0c or later

Adobe

Reader

: It is necessary to refer to the operating instructions on the provided CD-ROM.

* Microsoft

Internet Explorer

6.0 SP2/SP3 is required when using Microsoft

Windows

XP Professional SP2/SP3 or Microsoft

Windows

XP Home Edition SP2/SP3, respectively.

Important:

• When using a PC that does not meet the above requirements, displaying of images may become slow or the web browser may

become inoperable.

• Audio may not be heard if a sound card is not installed on a PC. Audio may be interrupted depending on the network environ-

ment.

• Microsoft

Windows

XP Professional x64 Edition is not supported.

Note:

• Refer to "Notes on Windows Vista

" (PDF) for further information about system requirements for a PC and precautions when

using Microsoft

Windows Vista

Trademarks and registered trademarks

• Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or

other countries.

• Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX, DirectX are either a registered trademark or trademark of

Microsoft Corporation in the United States and/or other countries.

• Intel and Pentium are trademarks or registered trademarks of Intel Corporation and its subsidiaries in the USA and other coun-

tries.

• Other names of companies and products contained in these operating instructions may be trademarks or registered trademarks

of their respective owners.

Summary of Contents for WJ-ND400K

































































Search results

Summary of Contents for WJ-ND400K

Reviews:

Related manuals for WJ-ND400K

Brands by name

Popular brands

Panasonic WJ-ND400K, Installation Manual

Search results

Summary of Contents for WJ-ND400K

Reviews:

Related manuals for WJ-ND400K

Brands by name

Popular brands