11
Precautions for installation
Use this product for indoor use only.
Avoid the following locations for installation.
• Places exposed to direct sunlight
• Places subject to having strong vibration or impact
• Near magnetic field sources such as a television or speak-
ers
• Place where condensation forms easily, where temperature
changes greatly, and humid places
• Steamy and oily places such as kitchens
• Places which are not level
• Places subject to dust
• Places where this product and the connected cables can
be damaged easily
Place this product horizontally on a level surface.
Do not place this product in an upright position. When stack-
ing multiple recorders, clear a space of more than 5 cm {1.97"}
from both sides, the top, the bottom and the rear of the
recorders.
Heat dissipation
Refer to the following to prevent fire and malfunction of the
unit.
• Do not block the front and rear for smooth ventilation.
Keep the unit 5 cm {1.97"} or more away from the both
sides and the upper side.
• Keep clean the ventilation openings of the unit to prevent
overheating.
• A lifetime of the cooling fan is limited by use.
Avoid placing this product near noise sources
If this product is placed near noise sources such as fluorescent
lamps, noises may be produced.
In this case, rewire avoiding the noise sources, or move this
product to a place far from the source.
5 cm {1.97"}
or more
5 cm {1.97"}
or more
5 cm {1.97"}
or more
Avoid placing receptacles that contain liquids such as
water near this product.
If liquid spills onto this product, it may cause fire or an electric
shock.
Grounding
Confirm that the wire is connected from the SIGNAL GND ter-
minal to earth ground.
A grounding connection must be made before connecting the
power plug of this product to the main power supply.
When disconnecting the grounding wire, make sure that the
power plug of this product is disconnected from the main
power supply.
