51
11
Close the front cover and lock it by pushing and
turning the key to the left.
Keep the key in a safe place.
12
Check the disk information.
The following can be checked on the "Disk information"
page on the setup menu. Refer to the setup instructions
(PDF) for further information.
• Total capacity of the hard disk drive
• Available capacity of the hard disk drive
• Hour meter
• Operational mode of the hard disk drive
• Time and date range of the images recorded on the
hard disk drive
Note:
• It is impossible to remove the HDD unit using the buttons
and the LCD on the front panel when running in the RAID 5
or RAID 6 mode.
• Refer to page 55 for information on how to replace a faulty
hard disk drive.
●
Remove all the HDD units in the
extension unit at the same time
It is possible to remove all the HDD units in the extension unit.
Refer also to the operating instructions of the extension unit.
1
After inserting the provided key into the key hole on
the front cover, push and turn it to the right to open
the front cover.
The following operations are to be performed on the net-
work disk recorder after the recognition process is com-
plete.
2
Hold down the [USE] button for 2 seconds or more.
The buzzer will sound.
3
Press the arrow button (up or down) repeatedly until
the "HDD Operation" indication is displayed.
4
Press the [SET] button.
5
Press the arrow button (up or down) repeatedly until
the "Remove EXT" indication is displayed.
6
Move the underscore mark below "YES" using the
arrow button (left or right), and then press the [SET]
button.
7
Select the extension unit (EXT#) to be removed using
the arrow button (up or down), and then press the
[SET] button.
(2)
(1)
(1)
(2)
