24
3
Place the provided rack mounting brackets on both
sides of the recorder and fix them with the rack
mounting bracket fixing screw (x6).
Secure them using the rack mounting bracket fixing screw
(x6).
4
Install the recorder in the rack by using four rack
mounting screws.
Secure using the rack mounting screws.
Important:
• When installing the recorder in the rack, make a space of
1U (44 mm {1.73"}) above and below the recorder for ven-
tilation.
• Keep the temperature in the rack below +45 °C {113 °F}.
• It is recommended to install cooling fans or equivalents to
keep the temperature in the rack below +30 °C {86 °F}.
• Do not block the ventilation openings or slots to prevent
the recorder from overheating.
Install the recorder in a rack
Install the recorder in an EIA standard 19-inch rack (Depth: 550
mm or more).
Note:
• Use four M5 x 12 screws (locally procured) to install the
recorder in a rack.
■
Installation procedure
1
Remove the five rubber feet from the bottom of the
recorder using a flathead screwdriver.
Use a screwdriver to remove the screws holding the rub-
ber feet.
2
Attach the rack handles to the rack mount brackets.
Fix them using the screws (x4) and the washers (x4) for the
rack handle.
Remove rubber feet
Rack handle
Rack mounting bracket
Screws for the rack handle
Washer
Washer
Rack mounting brackets (provided)
Rack handle
Rack handle
Rack mounting bracket fixing screws (provided)
Rack mounting screws (M5 x 12, locally procured)
