45
■
HDD unit
To install a hard disk drive in the recorder, it is necessary to
assemble an HDD unit (encase the hard disk drive in the HDD
canister).
The HDD unit is designed to easily install/remove the hard disk
drive in/from the recorder.
Contact your dealer about purchasing, installing, and replacing
the hard disk drives.
Important:
• Hard disk drives are precision devices. Before installing the
hard disk drives, read the "Hard disk drive" section of
"Precautions (page 9)" together with the following.
• Before touching a hard disk drive, release static elec-
tricity from your body using an anti-static grounding
strap, etc.
Even after releasing static electricity, hold the side of
the hard disk drive when carrying it. To prevent dam-
age to the hard disk drive from static electricity, do not
touch the circuit board and the connectors of the hard
disk drive.
• Use an anti-static mat and an anti-static grounding
strap when installing/replacing the hard disk drives.
• When installing hard disk drives, use a low-torque
powered screwdriver or a torque screwdriver to tighten
screws with the specified torque.
• The hard disk drive and the HDD canisters should be
packaged in exclusive cushioning.
The hard disk drive and the HDD canisters may be
damaged by a fall or vibration. When transporting the
extension unit, put these cushions from the extension
unit and pack them again in the following
method.
(1) Put the cushion between the front cover and HDD
canister.
(2) Put the cushions between the extension unit and inner
box.
(3) Put the corner cushions between the inner box and
outer box.
HDD canister
HDD
Anti-static mat
Cushion
Inner box
Corner cushion
Inner box
Outer box
Cushion
