Panasonic WJ-ND400K Page 6 Installation Manual Download | Manualshive

Page: 6 / 64

background image

6

Preface

The network disk recorder (WJ-ND400K, WJ-ND400K/G) is designed for use within a surveillance system, and record images/audio
from the connected network cameras on the hard disk drives (HDDs).
Up to 64 cameras can be connected via a network.
The optional HDDs encased in the provided HDD canisters (hereinafter referred as HDD units) can easily be installed/removed in/from
this product.
It is possible to perform the settings or operate the recorder using a web browser installed on a PC connected to a network. (It is
necessary to configure the network settings of a PC to operate this product using a PC.) Up to 16 PCs (web browsers) can access
the recorder concurrently and it is possible to perform the settings and operate the recorder. (The maximum number of PCs that can
access the recorder varies depending on the network.)
* No HDD is supplied with this recorder. For purchasing HDD, contact your dealer.

About the user manuals

There are 4 manuals provided for the WJ-ND400K, WJ-ND400K/G as follows.

Installation Guide (this book):

Contains descriptions of how to install/connect this product, and descriptions of how to
operate this product with the buttons on the front panel.

Setup Instructions (PDF):

Contains descriptions of how to configure the required settings and how to connect to
other devices.

Operating Instructions (PDF):

Contains descriptions of how to operate this product with a PC.

Quick Reference Guide:

Contains descriptions of how to configure the basic settings and how to use the major
functions.

Adobe

®

Reader

®

is required to read the PDF files (the setup instructions and the operating instructions) on the provided CD-ROM.

When Adobe

®

Reader

®

is not installed on the PC, download the latest Adobe

®

Reader

®

from the Adobe web site and install it.

"WJ-ND400" or "ND400" shown in the instructions and illustrations used in these operating instructions indicate the WJ-ND400K,
WJ-ND400K/G.
The screens used in these operating instructions show the case of NTSC model.
Refer to "readme.txt" on the provided CD-ROM for further information about the optional dedicated software, compatible cameras
and their versions.

«
...
4
5
6
7
8
...
»

Summary of Contents for WJ-ND400K

































































Reviews:

No comments

Related manuals for WJ-ND400K

Brand: Yamaha Pages: 24

MediaLounge DSM-520

Brand: D-Link Pages: 127

DivX Connected DSM-330

Brand: D-Link Pages: 38

Brand: Youtopia Pages: 24

Brand: BARIX Pages: 2

Brand: Marantz Pages: 2

Brand: Philips/Magnavox Pages: 2

Brand: Inter-m Pages: 28

Brand: Optimus Pages: 24

Brand: Aiwa Pages: 80

Brand: Vais Technology Pages: 30

Brand: THOMSON Pages: 39

Brand: UCView Pages: 4

Brand: Archos Pages: 20

Brand: Marantz Pages: 34

Brand: Insignia Pages: 102

Micro MP3 PRO USB2.0

Brand: Kanguru Pages: 49

Brand: Primare Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands