Panasonic Varicam 35, Operating Manual

Page: 54 / 174

– 54 –
Chapter 5 Control Panel — HOME screen
HOME screen
The Home screen displays the basic camera settings and is used to change those settings.
[FPS] Sets the frame rate.
[VFR]
Toggles the variable frame rate.
When this is [OFF], the frame rate become 1x the rate set in [MENU] →
[SYSTEM SETTING] → [FREQUENCY].
f
When this is [ON], audio cannot be recorded. Audio is recorded at the sub
recorder.
[PRESET] Mode for selecting preset frame rates.
Up to 12 presets can be stored in memory.
Presets can be added/deleted using [ADD]/[DEL].
[VARIABLE] Mode for selecting from the overall variable range.
The variable step changes through [FINE]/[NORMAL]/[COARSE].
[SHUTTER] Sets the shutter speed.
[ON]/[OFF]
[OFF] means shutter off (open angle 360 deg).
[PRESET] Mode for selecting preset shutter speeds.
Up to 12 can be registered.
Presets can be added/deleted using [ADD]/[DEL].
[SYNCHRO] Mode for selecting from the overall variable range.
The variable step changes through [FINE]/[COARSE].
[deg/sec] Determines the shutter setting unit.
[deg]: Open angle
[sec]: Second
[EI] Sets the EXPOSURE INDEX (gain).
[ISO/dB]
Selects the setting method.
[NATIVE ONLY] Only the native ISO can be selected. (when [ISO] is set)
[800BASE] The ISO800 standard value can be selected. (when [ISO] is set)
[5000BASE] The ISO5000 standard value can be selected. (when [ISO] is set)
[WB] Sets the color temperature (white balance).
[AWB]
Executes automatic white balancing.
[PRESET] Mode for selecting preset white balance values.
Up to 12 can be registered.
Presets can be added/deleted using [ADD]/[DEL].
If [AWB] is performed, the results are automatically added to the choices.
[TEMP SHIFT] Mode for making adjustments from the overall variable range.
[GMg] Shifts to the Green-Magenta axis.
[COLOR] Sets the video colors (gamma and gamut).
[MAIN COLOR]
Sets the output colors of videos from terminals <SDI OUT1> to <SDI OUT4> as
well as videos recorded in the main recorder.
[SUB COLOR] Sets the colors of videos recorded in the sub recorder.
[Grading SEL] Sets the grading function.
[MAIN COLOR] is only enabled in [V-Log] mode.
[3D LUT] Sets the grading in the [3D LUT].
[Grading SEL] is disabled when this is [OFF].
When [Grading SEL] is set to [Internal] or [External App]
f
Loads from the SD memory card using [LOAD].
f
Saves the setting value to the SD memory card with [SAVE AS].
[CDL] Sets the grading in [CDL].
[Grading SEL] is disabled when this is [OFF].
When [Grading SEL] is set to [Internal] or [External App]
f
Sets [Slope]/[Offset]/[Power]/[Saturation] on the control panel.
f
Loads from the SD memory card using [LOAD].
f
Saves the setting value to the SD memory card with [SAVE AS].