Panasonic Varicam 35, Operating Manual

Page: 104 / 174

– 104 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[PLAYBACK GRADING] Sets the grading method during the playback.
[ON]:
Applies grading process to the playback video based on the grading information of the recording.
[OFF]:
Performs grading process to the playback video based on the setting in [SYSTEM SETTINGS]
→ [COLOR SETTING] → [MON 1]/[MON 2]/[VF]/[VF SDI]. The grading process is applied only to video
recording V-Log.
The grading process is not performed to the video from the SDI output terminal.
f
Factory setting: [OFF]
[CDL] Sets the grading process method when [GRADING] is set to [Internal] or [External App].
When [GRADING] is set to [Internal] or [External App]
[ON]/[OFF]/[SAVE AS(SD CARD)]
When [GRADING] is set to [OFF]
[OFF]
f
Factory setting: [OFF]
[MON 1] Sets the output image from the <MON OUT1> terminal.
Selectable items vary depending on the [MAIN] setting.
When [MAIN] is set to [V-Log] and [GRADING] is set to [Internal] or [External App]
[V-Log]/[GRADING]
When [MAIN] is set to [V-Log] and [GRADING] is set to [OFF]
[V-Log]/[V-709]
When [MAIN] is set to [V-709]
[V-709]
When [MAIN] is set to [3D LUT]
[3D LUT]
f
Factory setting: [V-Log]
[MON 2] Sets the output image from the <MON OUT2> terminal.
Selectable items vary depending on the [MAIN] setting.
When [MAIN] is set to [V-Log] and [GRADING] is set to [Internal] or [External App]
[V-Log]/[GRADING]
When [MAIN] is set to [V-Log] and [GRADING] is set to [OFF]
[V-Log]/[V-709]
When [MAIN] is set to [V-709]
[V-709]
When [MAIN] is set to [3D LUT]
[3D LUT]
f
Factory setting: [V-Log]
[VF] Sets the output image from the <VF> terminal and the <VF SDI> terminal.
Selectable items vary depending on the [MAIN] setting.
When [MAIN] is set to [V-Log] and [GRADING] is set to [Internal] or [External App]
[V-Log]/[GRADING]/[V-709]/[LCC]
When [MAIN] is set to [V-Log] and [GRADING] is set to [OFF]
[V-Log]/[V-709]/[LCC]
When [MAIN] is set to [V-709]
[V-709]
When [MAIN] is set to [3D LUT]
[3D LUT]
f
Factory setting: [V-Log]
[VF SDI] Sets the output image from the <VF SDI> terminal.
Selectable items vary depending on the [MAIN] setting.
When [MAIN] is set to [V-Log]
[Same As VF]/[V-Log]
When [MAIN] is set to anything other than [V-Log]
[Same As VF]
f
Factory setting: [Same As VF]
[ANAMORPHIC
DESQUEEZE]
[SUB REC & MON OUT] Sets if the image to be recorded in the sub recorder and the monitor output image is to be de-squeezed.
[ON], [OFF]
f
Factory setting: [OFF]
[VF & VF SDI] Sets if the output image from the <VF> terminal and the <VF SDI> terminal is to be de-squeezed.
[ON], [OFF]
f
Factory setting: [OFF]
[DESQUEEZE RATIO] Sets the de-squeeze ratio.
[1.3x]:
De-squeeze 1.3 times in horizontal direction.
[1.3xmag]:
It will be in aspect ratio of 2.39:1 for mastering generated from the image de-squeezed 1.3
times in horizontal direction.
[2.0x]:
De-squeeze 2.0 times in horizontal direction.
[2.0xmag]:
It will be in aspect ratio of 2.39:1 for mastering generated from the image de-squeezed 2.0
times in horizontal direction.
f
Factory setting: [1.3x]
[IMAGE INVERT] [SUB REC & MON OUT] Sets if the image to be recorded in the sub recorder and the monitor output image is to be inverted.
[ON], [OFF]
f
Factory setting: [OFF]
[VF & VF SDI] Sets if the output image from the <VF> terminal and the <VF SDI> terminal is to be inverted.
[ON], [OFF]
f
Factory setting: [OFF]