Panasonic Varicam 35, Operating Manual

Page: 145 / 174

– 145 –
Chapter 12 Extension module — Assembling Extension Modules
Assembling Extension Modules
Removing the camera extension module and recording extension module
Before assembly, remove the 2 modules.
Fig. 1
Fig. 2
1
While raising the lock knob (red) of the recording extension module release lever (Fig. 1), pull the recording extension module
release lever. (Fig. 2)
The rear part of the recording extension module will slightly come up.
2
Lift the recording extension module.
3
Remove the lock angle of the camera extension module from the lock plate of the recording extension module.
Assembling the camera module and the camera extension module
Fig. 1 Fig. 2
Fig. 3 Fig. 4
1
Align the upper lock angle at the front of the camera extension module with the upper lock plate at the rear of the camera module.
(Fig. 1)
2
Firmly push in the camera extension module and connect the connection terminals of the camera module and camera extension
module. (Fig. 2)
@ @
NOTE
t
You cannot join the modules together if the V edge of the camera module is down. (Fig. 3) Push down the recording module release lever of the
camera module to raise the V edge. (Fig. 4)
t
Do not touch the mechanical parts near the V edge. The V edge will move quickly, which may cause injury.