Panasonic Varicam 35 Page 135 Operating Manual Download

Page: 135 / 174

– 135 –

Chapter 11 Network Connection — Preparing for connection

Preparing for connection

For wireless LAN

Attach the wireless module AJ-WM30/AJ-WM50 (optional) to the camera.

Fig. 1

Fig. 2

Fig. 3

Push the lever down, and open the cover. (Fig. 1, Fig. 2)

Connect the wireless module to the <USB HOST> terminal. (Fig. 3)

Insert it all the way.

Close the cover.

NOTE

When removing the wireless module, pull it down straight.

When connected with the wireless LAN, attach the wireless module securely and close the cover.

Cautions when using wireless module AJ-WM30/AJ-WM50

Read the operating manual of the wireless module thoroughly and understand it before using.
For the latest information, visit the following website:
http://pro-av.panasonic.net/

For wired LAN

Connect a LAN cable (optional).

Connect the LAN cable to the <LAN> terminal on the right side.

Summary of Contents for Varicam 35















































































































































































Search results

Summary of Contents for Varicam 35

Reviews:

Related manuals for Varicam 35

Brands by name

Popular brands

Panasonic Varicam 35, Operating Manual

Search results

Summary of Contents for Varicam 35

Reviews:

Related manuals for Varicam 35

Brands by name

Popular brands