Panasonic Varicam 35, Operating Manual

Page: 111 / 174

– 111 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[GET] Sets whether to register the screen center color as the color by which the skin tone detail is applied.
[EXECUTE], [CANCEL]
[ZEBRA SW] Sets whether to superimpose the zebra signal to the color by which the skin tone detail is applied.
[ON], [OFF]
f
Factory setting: [OFF]
[EFFECT LEVEL] Sets the effective level of the skin tone detail. The higher the value, the more significant the effect.
[0] - [31]
f
Factory setting: [16]
[DETECT TABLE] Selects the skin tone table of the subject that displays the skin tone detail.
[A], [B], [C]
f
Factory setting: [A]
[I CENTER] Sets the center position of the upper I axis (setting the area that displays the skin tone).
[0]…[255]
f
Factory setting: [35]
[I WIDTH] Sets the width of the area that displays the skin tone of the upper I axis that focus on [I CENTER].
[0]…[255]
f
Factory setting: [55]
[Q WIDTH] Sets the width of the area that displays the skin tone of the upper Q axis that focus on [I CENTER].
[0]…[127]
f
Factory setting: [22]
[Q PHASE] Sets the phase of the area that displays the skin tone regarding to the Q axis.
[0]…[255]
f
Factory setting: [0]
[MATRIX] [SW] Enables/disables the matrix function.
[ON], [OFF]
f
Factory setting: [OFF]
[(R-G)_N] Adjusts the linear matrix.
[
−
127]…[127]
f
Factory setting: [0]
[(R-G)_P] Adjusts the linear matrix.
[
−
127]…[127]
f
Factory setting: [0]
[(R-B)_N] Adjusts the linear matrix.
[
−
127]…[127]
f
Factory setting: [0]
[(R-B)_P] Adjusts the linear matrix.
[
−
127]…[127]
f
Factory setting: [0]
[(G-R)_N] Adjusts the linear matrix.
[
−
127]…[127]
f
Factory setting: [0]
[(G-R)_P] Adjusts the linear matrix.
[
−
127]…[127]
f
Factory setting: [0]
[(G-B)_N] Adjusts the linear matrix.
[
−
127]…[127]
f
Factory setting: [0]
[(G-B)_P] Adjusts the linear matrix.
[
−
127]…[127]
f
Factory setting: [0]
[(B-R)_N] Adjusts the linear matrix.
[
−
127]…[127]
f
Factory setting: [0]
[(B-R)_P] Adjusts the linear matrix.
[
−
127]…[127]
f
Factory setting: [0]
[(B-G)_N] Adjusts the linear matrix.
[
−
127]…[127]
f
Factory setting: [0]
[(B-G)_P] Adjusts the linear matrix.
[
−
127]…[127]
f
Factory setting: [0]
[COLOR CORRECTION] [SW] Enables/disables the color correction function.
[ON], [OFF]
f
Factory setting: [OFF]
[R (SAT)] Corrects red color saturation.
[
−
63]…[63]
f
Factory setting: [0]
[R (PHASE)] Corrects the red hue.
[
−
63]…[63]
f
Factory setting: [0]
[R-Mg (SAT)] Corrects the color saturation between red and magenta.
[
−
63]…[63]
f
Factory setting: [0]