Panasonic Varicam 35, Operating Manual

Page: 147 / 174

– 147 –
Chapter 12 Extension module — Assembling Extension Modules
Disassembling
Fig. 1
Fig. 2
1
Push down the recording extension module release lever (Fig. 2) while pulling up the lock knob (red) of the recording extension
module release lever. (Fig. 1)
The rear part of the recording module will slightly come up.
It will be difficult for the rear part to come up when heavy items such as batteries are mounted.
2
Lift the recording module.
Do not hold the control panel part. Doing so may cause the control panel to detach and fall.
3
Remove the upper lock angle at the front of the recording module from the upper lock plate at the rear of the recording extension
module.
Mounting extension cables
How the extension cable is connected is the same for the camera extension module and the recording extension module.
Fig. 1
Fig. 2 Fig. 3
1
Loosen the screw on the extension cable securing fitting. (Fig. 1)
2
Connect the extension cable to the <EXT> terminal. (Fig. 2)
Confirm the shape of the connector and insert the extension cable.
Securely tighten the screw on the extension cable after inserting.
3
Tighten the screw on the extension cable securing fitting. (Fig. 3)