Panasonic Varicam 35, Operating Manual

Page: 110 / 174

– 110 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[ISO SELECT] Selects the operation of ISO.
[NATIVE ONLY], [800BASE], [5000BASE]
f
Factory setting: [NATIVE ONLY]
[NATIVE ISO] Sets the value when [NATIVE ONLY] is selected.
[800], [5000]
The value will be [400] and [2500] when [HIGH SPEED] is set to [ON].
f
Factory setting: [800]
[800BASE ISO] Sets the value when [800BASE] is selected.
[200], [250], [320], [400], [500], [640], [800], [1000], [1250], [1600], [2000], [2500], [3200], [4000],
[5000], [6400], [8000], [10000], [12800]
It will be [200], [250], [320], [400], [500], [640], [800], [1000], [1250], [1600], [2000], [2500], [3200], [4000],
[5000], and [6400] when the setting of [HIGH SPEED] is [ON].
f
Factory setting: [800]
[5000BASE ISO] Sets the value when [5000BASE] is selected.
[1250], [1600], [2000], [2500], [3200], [4000], [5000], [6400], [8000], [10000], [12800]
It will be [1250], [1600], [2000], [2500], [3200], [4000], [5000], and [6400] when [HIGH SPEED] is set to
[ON].
f
Factory setting: [5000]
[SETTING(GAIN)] Sets the value when [dB] is selected.
[0dB], [3dB], [6dB], [9dB], [12dB], [15dB], [18dB], [21dB], [24dB]
f
Factory setting: [0dB]
[GAIN OFFSET SW] Sets whether to perform fine adjustment of control when [dB] is selected.
[ON], [OFF]
f
Factory setting: [OFF]
[OFFSET LEVEL] Sets the fine adjustment level.
[0.0dB] - [0.9dB]
(0.1 dB step)
f
Factory setting: [0dB]
[SHUTTER] [SW] Enables/disables the shutter function.
[ON], [OFF]
f
Factory setting: [ON]
[DISPLAY MODE] Sets the shutter display unit.
[sec]:
Displays in time.
[deg]:
Displays at shutter open angle.
f
Factory setting: [deg]
[MODE] Switches the shutter control mode.
[PRESET]:
Selects the mode from 12 modes inside the memory.
[SYNCHRO]:
Selects the mode from the operable range.
f
Factory setting: [PRESET]
[SYNCHRO deg] Sets the value of angle control ([deg]).
[1.0]…[358.0]
f
Factory setting: [180.0]
[SYNCHRO sec] Sets the value of time control ([sec]). The lowest value changes depending on the frame rate ([FPS]) value.
[1/60] - [1/250]
f
Factory setting: [1/48]
[PRESET VALUE deg] Selects the angle control ([deg]) value from the maximum of 12 values set in the control panel.
Preset values that can be selected in the factory setting are [11.5], [22.5], [45.0], [90.0], [120.0], [144.0],
[172.8], [180.0], [270.0], and [358.0].
f
Factory setting: [180.0]
[PRESET VALUE sec] Selects the time control ([sec]) value from the maximum of 12 values set in the control panel.
Preset values that can be selected in the factory setting are [1/60], [1/100], [1/120], [1/250], [1/500],
[1/1000], and [1/2000].
f
Factory setting: [1/60]
[TEST SIG] [TEST SIG SEL] Sets the test signal output.
[OFF]:
Does not output a test signal.
[BARS]:
Outputs the color bar set in [COLOR BARS TYPE].
f
Factory setting: [OFF]
[COLOR BARS TYPE] Set the color bar to be used.
[SMPTE]:
Uses the color bar in the SMPTE standard.
[FULL]:
Uses full color bars.
f
Factory setting: [SMPTE]
[DETAIL] [SW] Enables/disables the detail function.
[ON], [OFF]
f
Factory setting: [OFF]
[CORING] Sets the coring amount for the detail signal.
[0] - [60]
f
Factory setting: [1]
[MASTER LEVEL] Sets the effect level for the detail signal.
[
−
31]…[31]
f
Factory setting: [0]
[SKIN DETAIL] [SW] Enables/disables the skin tone detail function.
[OFF], [ON]
f
Factory setting: [OFF]
[TABLE SELECT] Selects the table for the skin tone detail.
[A], [B], [C], [A
+
B], [A
+
C], [B
+
C], [A
+
B
+
C]
f
Factory setting: [A]