54
English
■
[Display → Device]
Enables/Disables this unit to perform interlocking
control of the HDMI-CEC compatible device.
[Disable]:
Disables this unit to perform interlocking control of the
HDMI-CEC compatible device.
Even if the power status of this unit changes, the
power status of the device will not be affected.
[Power off]:
Turning this unit off (standby) turns off (standby) all
the devices connected to the HDMI 1 and HDMI 2
terminals. The power-on operation is not interlocked.
[Power off / on]:
The device turns off/on (standby) in conjunction with
the power-off/on (standby) operation of this unit.
Note
●
For details of operation, refer to “Using HDMI-CEC
function”. (see page 112)
■
[Device → Display]
Enables/Disables the HDMI-CEC compatible device
to perform interlocking control of this unit.
[Disable]:
Disables the device to perform interlocking control of
this unit.
Even if the power status of the device changes, the
power status of this unit will not be affected.
[Power on]:
Turning on the device turns on this unit, and the input
(HDMI1/HDMI2) is switched to that of the device.
[Power off / on]:
The power status of this unit interlocks with the
power-off/on operation of the device.
Note
●
For details of operation, refer to “Using HDMI-CEC
function”. (see page 112)
●
Input will not be switched when [Options] - [Input lock]
is set.
Image settings
Sets the image displayed on the screen when the power
is turned on or no signal is input.
[Image settings] - submenu screen
Image settings
Startup image settings
No signal image settings
[Startup image settings]:
Sets the image displayed when the power is turned
on.
[No signal image settings]:
Sets the image displayed when there is no signal at
the selected input terminal.
Conditions of the image that can be set in [Read
user image]
●
Image size: 1 920 x 1 080 only
●
jpg files / bmp files (except for the ones that cannot
be played back with USB media player (see page
97))
●
jpg files (Applies only to a no-signal image of
3.5 MB or less in file size.)
File and folder names are displayed on the file list
with conditions as below.
‒ If a file or folder is placed directly under the root
directory of the USB device.
●
Up to 246 characters of file name (including the
extension) are properly displayed.
Note that the file list may disappear due to the
display time of the on-screen menu before the
entire display of file names completely appears.
●
Up to 244 characters of folder name are properly
displayed.
•
If the folder is placed hierarchically, the number
of characters displayed decreases by the
number of characters for the file path (folder
information).
‒ Only the files with file names described with ASCII
characters excluding control code are displayed.
Note
●
[Picture] cannot be adjusted when setting the startup
image.
●
Only [Backlight], [Gamma] and [Colour temperature]
can be adjusted when setting the no-signal image.
●
Images displayed for the startup image and no-signal
image may slightly differ from images confirmed on
the computer.
●
When [No signal image settings] is set to [On], [Input
search] and [Failover/Failback] will be disabled, and
the menu will be greyed out.
