Panasonic SF2H Series Operating Instructions Manual Download Page 114

Page: 114 / 132

114

English

Using data cloning

Menu settings and adjusted values of a single display

can be copied to multiple displays via LAN or using a

USB memory.

■

Data that can be copied

Settings and set values of [Picture], [Sound], [Setup],

[Position] and [Options] menus, internal LightID
User image registered in [Setup] - [Image settings]

●

The following data cannot be copied. Setting is

required for each display.
[Date and time]
Setting for [Network settings] - [LAN setup]
[Synchronize display setting]
[Time zone]
[NTP synchronization]
NTP server name
DNS server
Display ID in [Display ID]

■

Supported device

●

Commercially available USB memory devices are

supported. (Those with security functions are not

supported.)

●

USB memory devices other than those formatted in

FAT16 or FAT32 cannot be used.

●

Up to 32 GB of USB memory in size are supported.

●

Only single partition configuration is supported.

Note

●

If the sizes of the displays are different, the cloning

function does not operate. Use the common sized

displays.

●

Set the input to something other than [USB] or

[MEMORY VIEWER], and perform the data cloning.

●

[USB data cloning] menu can also be displayed using

the main unit buttons.
Operate in the same way as described in “About

Options menu” - “Unit” (see page 68).

●

The remote control is necessary to operate [LAN data

cloning].

Copying data to other display via

LAN

Display [Setup] menu pressing

<SETUP>.

Select [OSD language] with

and

press <ENTER> for over 3 seconds.

The following display appears.

Options

Display software information

LAN data cloning

USB data cloning

Software licenses

Shipping

Select [LAN data cloning] with

and press <ENTER>.

Select [Select display] with

and

press <ENTER>.

Displays on the same subnet are listed.

Status 　Display name　

IP address

LAN data cloning

Execute

Write protect

Off

Select display

Select the display to copy the data to

with

and press <VOL +>.

Select all the displays to copy the data to.

SF2H-001

Please check the display to register.

Select display

Check

Display name　

IP address

192.168.

0. 1

192.168. 0. 2

192.168. 0. 4

192.168. 0. 25

192.168. 0. 31

192.168. 0. 7

192.168. 0.124

192.168. 0.211

SF2H-002

SF2H-004

SF2H-005

SF2H-014

SF2H-006

SF2H-041

SF2H-009

Press <ENTER>.

Summary of Contents for SF2H Series





































































































































Search results

Summary of Contents for SF2H Series

Reviews:

Related manuals for SF2H Series

Brands by name

Popular brands

Panasonic SF2H Series, Operating Instructions Manual

Search results

Summary of Contents for SF2H Series

Reviews:

Related manuals for SF2H Series

Brands by name

Popular brands