Panasonic SF2H Series Operating Instructions Manual Download Page 72

Page: 72 / 132

English

[Backup input change]

Displays whether or not operating conditions for the

Backup Input function are met.

[Inactive]:

Indicates that the conditions are not met, and

inactivates the Backup Input function.

[Active]:

Indicates that the conditions are met, and activates

the Backup Input function.

[Main input]

Displays the (main) input set by switching input.

[Current input]

Displays whether the input currently in use for viewing

is the (main) input set by switching input or the

backup one.

Setting conditions

The following table describes restrictions (available

combinations) on each setting item.

Main

HDMI1
HDMI2
DIGITAL

LINK
DVI-D

PC
VIDEO

USB

Backup

HDMI1
HDMI2
DIGITAL

LINK
DVI-D

○

PC
VIDEO

USB

○

○ : Selectable for both Primary and Secondary.

: Selectable for either Primary or Secondary.

× : Not selectable for neither Primary nor Secondary.

Recall display
Pressing <RECALL> displays any of the followings.

●

When the main input is being used for viewing and

the operating conditions for the Backup Input function

are met.

HDMI1

16:9

Backup mode OK

●

When the backup input, enabled by the operation of

the Backup Input function, is being used for viewing.

HDMI1

16:9

Primary backup input

When the conditions for the Backup Input function

are met, the following screen is displayed.

Backup mode OK

Note

●

This menu will be greyed out and cannot be set under

the following condition.

•

[Input search] is set to the item other than [Off].

(see page 69)

•

When [Setup] - [Image settings] - [No signal image

settings] - [Display setting] is set to [On]. (see page

55)

●

When set to the USB input, the unit determines video

signals are interrupted by judging the USB memory is

not connected to the USB terminal.

●

This function may not operate correctly depending on

the image playback device.

Audio input select

Set up the sound when a video input is selected.

Select the video input with .
Set the audio input with .

HDMI1

HDMI2
DIGITAL LINK
DVI-D
PC
VIDEO

AV IN

DIGITAL LINK

HDMI2

HDMI1

Audio input select

●

The illustration above shows the factory settings.

Video input

Audio input

HDMI1

HDMI1 / AV IN / No audio

HDMI2

HDMI2 / AV IN / No audio

DIGITAL LINK

DIGITAL LINK / AV IN /

No audio

DVI-D / PC /

VIDEO

AV IN / No audio

●

No audio: No audio input (Mute)

When the setting for the audio input has been

changed from the factory settings, the audio input is

displayed as below.

HDMI1

16:9

AV IN

Summary of Contents for SF2H Series





































































































































Search results

Summary of Contents for SF2H Series

Reviews:

Related manuals for SF2H Series

Brands by name

Popular brands

Panasonic SF2H Series, Operating Instructions Manual

Search results

Summary of Contents for SF2H Series

Reviews:

Related manuals for SF2H Series

Brands by name

Popular brands