Panasonic PT-LZ370E Operating Instructions Manual Download

Page: 78 / 120

[NETWORK] menu

78 - ENGLISH

Settings

Network connections

The projector has a network function, and the following operations are available from the computer using the Web

browser control.

Setting and adjustment of the projector

Display of the projector status

Setting of E-mail notification

“Crestron RoomView” is a system developed by Crestron Electronics, Inc. which collectively manage and

control multiple system devices connected via the network, from a computer. This projector supports “Crestron

RoomView”.

For details of “Crestron RoomView”, refer to the Crestron Electronics, Inc. website. (Provided only in English.)

URL http://www.crestron.com

For the download of “Crestron RoomView Express”, refer to the Crestron Electronics, Inc. website. (Provided

only in English.)

URL http://www.crestron.com/getroomview

Note

A LAN cable is required to use the network function.

The information and the URL of the website may be changed or deleted without notice.

A Web browser is required to use this function. Confirm that the Web browser can be used beforehand.

Compatible OS: Windows XP/Windows Vista/Windows 7, Mac OS X v10.4/v10.5/v10.6/v10.7

Compatible browser: Internet Explorer 7.0/8.0/9.0, Safari 4.0/5.0 or later (Mac OS)

Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be

used beforehand.

Use a LAN cable that is straight-through or crossover

and compatible with category 5 or higher.

*1: Depending on the system configuration, the type of the LAN cable that can be used may be either straight-through,

crossover, or both. Consult your network administrator for the details.

Use a LAN cable with the length of 100 m (328'1") or shorter.

Required environment for computer connection

Check if your computer is equipped with wired LAN beforehand.

Before connecting the projector to your computer, be sure to check the following settings.

▶

■

Check 1: LAN cable

▶

Is the cable connected correctly?

▶

Use a LAN cable compatible with category 5 or higher.

▶

■

Check 2: Wired LAN settings

A computer equipped with wired LAN function

▶

Is the wired LAN function activated?

A computer not equipped with wired LAN function

▶

Is the wired LAN adapter recognized correctly?

▶

Is the wired LAN adapter activated?

▶

Install the wired LAN adapter driver before you use the network function.

Refer to the instruction manual of the wired LAN adapter for the installation of the driver.

Summary of Contents for PT-LZ370E

























































































































Search results

Summary of Contents for PT-LZ370E

Reviews:

Related manuals for PT-LZ370E

Brands by name

Popular brands

Panasonic PT-LZ370E, Operating Instructions Manual

Search results

Summary of Contents for PT-LZ370E

Reviews:

Related manuals for PT-LZ370E

Brands by name

Popular brands