Panasonic PT-LZ370E Operating Instructions Manual Download Page 74

Page: 74 / 120

[SECURITY] menu

74 - ENGLISH

Settings

[DISPLAY SETTING]

You can overlap the security message (text or image)

over the projecting image.

1) Press

▲▼

to select [DISPLAY

SETTING].

2) Press

◀▶

to switch [DISPLAY

SETTING].

▶

The setting will change as follows each time

you press the button.

[OFF]

[TEXT]

[USER

LOGO]

[OFF]

Disables the text/user logo

display.

[TEXT]

Enables the text display.

[USER LOGO]

Projects the logo transferred with

“Logo Transfer Software”

*1: “Logo Transfer Software” is included in the attached CD-

ROM.

Note

To create the image for [USER LOGO], “Logo

Transfer Software” included in the supplied CD-

ROM is required.

You cannot display both security message and

closed caption at the same time.

[TEXT CHANGE]

You can change the text displayed when the text

display is enabled by selecting [TEXT] in [DISPLAY

SETTING].

1) Press

▲▼

to select [TEXT CHANGE].

2) Press the <ENTER> button.

▶

The

[TEXT CHANGE]

screen is displayed.

3) Press

▲▼◀▶

to select the text, and

press the <ENTER> button to enter the

text.

▶

Up to 22 characters can be entered.

4) Press

▲▼◀▶

to select [OK], and

press the <ENTER> button.

▶

The text is changed.

[MENU LOCK]

You can set whether to display the menu and perform

the menu operation when you press the <MENU>

button.

1) Press

▲▼

to select [MENU LOCK].

2) Press

◀▶

to switch [MENU LOCK].

▶

The setting will change as follows each time

you press the button.

[OFF]

[ON]

[OFF]

Disables the lock of the menu

operation.

[ON]

Locks the menu operation.

Note

If an incorrect menu lock password is entered after

[MENU LOCK] is set to [ON], the menu operation is

disabled.

The [MENU LOCK] is set to [OFF] by default and

after you perform initialization.

The unlock status is maintained until the projector

is set to the standby mode.

Summary of Contents for PT-LZ370E

























































































































Search results

Summary of Contents for PT-LZ370E

Reviews:

Related manuals for PT-LZ370E

Brands by name

Popular brands

Panasonic PT-LZ370E, Operating Instructions Manual

Search results

Summary of Contents for PT-LZ370E

Reviews:

Related manuals for PT-LZ370E

Brands by name

Popular brands