Panasonic PT-JW130FBE Operating Instructions (Functional Manual) Download

Page: 23 / 217

Chapter 1

Preparation — Precautions for use

ENGLISH - 23

Accessories

Make sure that the following accessories are provided with your projector. Numbers enclosed in < > show the

number of accessories.

Wireless remote control unit <1>

(N2QAYA000092)

Card slot cap <1>

(TKKL5574)

(Attached to the projector at the time of purchase)

HDMI terminal cap <1>

(TKKL5575)

(Attached to the projector at the time of purchase)

LAN terminal cap <1>

(TKKL5576)

(Attached to the projector at the time of purchase)

Connector secure lock <1>

(TTRA0185)

AAA/R03 or AAA/LR03 battery <2>

(For remote control unit)

CD-ROM <1>

(1JK1JW130FE)

Allen wrench <1>

(Opposite side size 3.0 mm (1/8"))

(TXFQB03VLP4)

Attention

After unpacking the projector, discard the packaging material properly.

For missing accessories, consult your dealer.

Store small parts in an appropriate manner, and keep them away from small children.

Note

The optional Connector secure lock is used together with the Ceiling Kit or the Floor Stand Kit. Take care not to lose it.

The model numbers of accessories are subject to change without prior notice.

Contents of the supplied CD-ROM

The contents of the supplied CD-ROM are as follows.

Instruction/list (PDF)

Operating Instructions – Functional Manual
Multi Projector Monitoring & Control Software Operating Instructions (English only)
Wireless Manager ME6.2 Operating Instructions (English only)
List of Compatible Device

Models

This is a list of projectors that are compatible with the software

contained in the CD-ROM and their restrictions.

Software license

The license condition for the open source software used in the

projector is contained as a PDF file.

Software

Multi Projector Monitoring &

Control Software (Windows)

This software allows you to monitor and control multiple

projectors connected to the LAN.

Wireless Manager ME6.2

(Windows/Mac)

This software allows you to send the computer screen via

wireless LAN/wired LAN.

Summary of Contents for PT-JW130FBE


























































































































































































































Search results

Summary of Contents for PT-JW130FBE

Reviews:

Related manuals for PT-JW130FBE

Brands by name

Popular brands

Panasonic PT-JW130FBE, Operating Instructions (Functional Manual)

Search results

Summary of Contents for PT-JW130FBE

Reviews:

Related manuals for PT-JW130FBE

Brands by name

Popular brands