Chapter 5
Operations — Network connection
ENGLISH - 103
Connection example for image transfer
Miracast
Image transfer application software
Illustration of
connection
(Example) Displaying copyright-protected contents
(Example) Displaying on multiple screens
Projector
Miracast
Projector
Miracast compatible device
iPad/iPhone/iPod touch, Android terminal, and computer
on which Panasonic’s image transfer application software
has been installed
Input
Miracast
Panasonic APPLICATION
Communication
method
IEEE802.11a/n
IEEE802.11b/g/n
Connection
method
WPS + Wi-Fi Direct
Panasonic exclusive connection by user
Image
transmission
method
Miracast
Panasonic exclusive method
Setting for projector
1) Turn on the projector.
2) Press the <MENU> button to open the [NETWORK] menu and set [WIRELESS LAN] to either of
[M-DIRECT], [USER1], [USER2], or [USER3].
3) Configure the settings of the connection method selected in Step 2).
f
Refer to [WIRELESS LAN] (
x
page 78) for details.
Note
f
Wireless LAN and wired LAN cannot be used in the same segment.
f
If multiple devices are to be connected, set IP addresses that do not overlap.
f
Enter SSID correctly in single-byte alphanumeric characters.
f
“any” or “ANY” cannot be set for SSID.
f
This setting is not necessary when connecting Miracast. Refer to
“Miracast function” (
x
page 126) for Miracast.
f
The following settings are configured as the factory defaults.
[M-DIRECT]
[IP ADDRESS]
192.168.12.100
[SUBNET MASK]
255.255.255.0
[SSID]
M-DIRECTxxxx (xxxx stands for the last four-digit number of the
network ID.)
[CHANNEL]
1
[KEY]
The same character string as SSID
