Switching on/off the projector
ENGLISH - 51
Basic Operation
Power indicator
The power indicator displays the status of the power. Check the status of the power indicator <ON (G)/STANDBY
(R)> before operating the projector.
Power indicator <ON (G)/STANDBY (R)>
Indicator status
Status
No illumination or flashing
The main power is switched off.
Red
Lit
The power is switched off. (Standby mode.)
Projection will start if the power on < > button is pressed.
z
The projector may not operate when the lamp indicators
<LAMP1>/<LAMP2>/<LAMP3>/<LAMP4> or temperature indicator
<TEMP> is flashing (
page 146).
Green
Lit
Projecting.
Orange
Lit
The projector is preparing to switch off the power.
The power is switched off after a while. (Changes to the standby
mode.)
Note
z
In about 150 seconds after the projector is switched off and the luminous lamp cooling is started, the lamp
indicators will not light up even if the power is switched on. After the power indicator <ON (G)/STANDBY (R)>
lights in red, turn on the power again.
z
The projector consumes power even in standby mode (power indicator <ON (G)/STANDBY (R)> lit in red).
Refer to “Power consumption” (
page 179) for the power consumption.
z
The power indicator <ON (G)/STANDBY (R)> will flash in green if a remote control signal is received.
z
The power indicator <ON (G)/STANDBY (R)> will flash slowly in green while the shutter is closed. (
page 60)
z
If the power indicator <ON (G)/STANDBY (R)> is flashing in red, consult your dealer.
