[PROJECTOR SETUP] menu
ENGLISH - 113
Settings
[SIGNAL
INFORMATION]
z
[MEMORY NO.]:
Displays the memory number
of the input signal.
z
[INPUT]:
Displays the input terminal
currently selected.
z
[SIGNAL NAME]:
Displays the input signal name.
z
[SIGNAL FREQUENCY]:
Displays the frequency of the
input signal.
z
[SYNC.STATE]:
Displays the synch polarity of
the input signal.
z
[V.SYNC WIDTH]:
Displays the vertical sync signal
pulse width of the input signal.
z
[SCAN TYPE]:
Displays the scan type of the
input signal.
z
[TOTAL DOTS]:
Displays the total dot count of
the input signal.
z
[DISPLAY DOTS]:
Displays the number of input
signal display dots.
z
[TOTAL LINES]:
Displays the total line count of
the input signal.
z
[DISPLAY LINES]:
Displays the number of input
signal display lines.
z
[SAMPLING]:
Displays the sampling
information of the input signal.
z
[SIGNAL LEVEL]:
Displays the signal level of the
input signal.
z
[BIT DEPTH]:
Displays the gradation of the
input signal.
*1: The temperature status is displayed with text color (green/
yellow/red) and bar scale. Use the projector within the
indication in green.
Note
z
Some items in [SIGNAL INFORMATION] may be
displayed and others not displayed, depending on the
signal being input.
[NO SIGNAL SHUT-OFF]
You can set the power of the projector automatically
to standby if there is no input signal by the specified
time.
1) Press
▲▼
to select [NO SIGNAL
SHUT-OFF].
2) Press
◀▶
to switch [NO SIGNAL
SHUT-OFF].
[DISABLE]
Disables the No signal shut-off
function.
[10MIN.] -
[90MIN.]
Allows you to set in ten minutes
intervals.
[REMOTE2 MODE]
You can set the <REMOTE 2 IN> terminal.
1) Press
▲▼
to select [REMOTE2 MODE].
2) Press
◀▶
to switch [REMOTE2
MODE].
▶
z
The setting will change as follows each time
you press the button.
[DEFAULT]
[USER]
[L6500
SERIES]
[DEFAULT]
The pin assignment of the
<REMOTE 2 IN> terminal is used
by the factory default setting of the
projector. (
page 171)
[USER]
Used to change the setting of the
<REMOTE 2 IN> terminal.
[L6500
SERIES]
Use the settings for the L6500
series compatible REMOTE2
terminal.
▶
■
To set [USER]
3) Select [USER] in Step 2).
4) Press the <ENTER> button.
5) Press
▲▼
to select either [PIN2] or
[PIN8] and press
◀▶
to switch the
setting.
