Panasonic PT-DZ21KU, Operating Instructions Manual

Page: 124 / 186

[SECURITY] menu
124 - ENGLISH
Settings
[SECURITY] menu
Select [SECURITY] from the main menu, and
select the item from the sub-menu.
Refer to “ Navigating through the menu ”
(

page 63) for the operation of the menu
screen.
z
When the projector is used for the first time
Initial password: Press ▲▶▼◀▲▶▼◀ in
order, and press the <ENTER> button.
z
After selecting the item, press ▲▼◀▶ to set.
Attention
z
When you select the
[SECURITY]
from the main
menu and press the <ENTER> button, entering a
password is required. Enter the set password and
then continue operations of the [SECURITY] menu.
z
When the password has been changed previously,
enter the changed password, and press the
<ENTER> button.
Note
z
The entered password is displayed with * mark on
the screen.
z
An error message is displayed on the screen when
the entered password is incorrect. Re-enter the
correct password.
[SECURITY PASSWORD]
Display the [SECURITY PASSWORD] screen when
the power is turned on with the <MAIN POWER>
switch set to the <OFF> side. When the entered
password is incorrect, the operation will be restricted
to the power standby < > button, the <SHUTTER>
button, and the <LENS> (<FOCUS>, <ZOOM>, and
<SHIFT>) buttons.
1) Press ▲▼ to select [SECURITY
PASSWORD].
2) Press
◀▶
to switch [SECURITY
PASSWORD].
▶
z
The setting will change as follows each time
you press the button.
[OFF] [ON]
[OFF]
Disables the security password
entry.
[ON] Enables the security password entry.
Note
z
The [SECURITY PASSWORD] setting is set to
[OFF] at the time of purchase or when all the user
data has been initialized.
z
Change the password periodically that is hard to
guess.
z
The security password will be enabled after setting
[SECURITY PASSWORD] to [ON] and turning the
<MAIN POWER> switch to <OFF>.
[SECURITY PASSWORD
CHANGE]
Change the security password.
1) Press ▲▼ to select [SECURITY
PASSWORD CHANGE].
2) Press the <ENTER> button.
▶
z
The [SECURITY PASSWORD CHANGE]
screen is displayed.
3) Press ▲▼◀▶ and the number (<0> to
<9>) buttons to set the password.
▶
z
Up to eight button operations can be set.
4) Press the <ENTER> button.
5) Re-enter the password for the
confirmation.
6) Press the <ENTER> button.
Note
z
The entered password is displayed with * mark on
the screen.
z
When numerical values are used for the security
password, the security password is required to be
initialized if the remote control is lost. Consult your
dealer for the method of initialization.