Panasonic POVCAM AG-MDR25E Operating Instructions Manual Download | Manualshive

Page: 237 / 261

background image

- 237 -

During copying between SD cards

Display

Description

Behavior and cause

Use destination SD card
formatted with same as
source SD card.

This is displayed when the SD card format
(FAT32/exFAT)

*

differs between the SD

card of the copy source and that of the
copy destination.
* FAT32 is a format used for SDHC

memory cards. exFAT is a format used
for SDXC memory cards.

≥

Check the format of the SD card of the
copy destination.

CANNOT COPY.

This is displayed when the system
frequency (59.94 Hz/50.00 Hz) of AVCHD
clips differs between those recorded on
the SD card of the copy source and those
recorded on the SD card of the copy
destination.
(AVCHD clips with different system
frequencies cannot be recorded to the
same media.)

≥

Copy the AVCHD clips to a recordable
SD card. Use an SD card containing
clips with the same system frequency.

Exceeds capacity. Please
reselect.

There is not enough space on the SD
card.

≥

Replace the SD card of the copy
destination or delete unnecessary clips.

This clip cannot be
copied.

This is displayed when one or more of the
clips you are trying to copy cannot be
played back on this unit.

≥

Copy clips except for the ones that
cannot be copied.

Cannot copy: contains
recordings from other
devices.

This is displayed when a copy-related
operation involving a clip recorded with
another device is performed.

≥

Copy only the clips recorded with this
unit.

CANNOT SELECT BY
DATE ANY MORE.

This is displayed when no more clips can
be selected after the maximum limit is
reached, for example.

≥

After finishing copying, reselect the
desired dates.

CANNOT COPY - DATE
CAPACITY IS FULL.

This is displayed when no more clips can
be copied after the maximum limit set by
applicable standards is reached, for
example.

≥

Use an SD card with enough recordable
space.

CANNOT COPY
- THE NUMBER OF CLIPS
HAS REACHED
MAXIMUM.

Could not copy some
clips.

This is displayed when some clips cannot
be copied after the maximum limit set by
applicable standards is reached, for
example.

COPY FAILED. PLEASE
CHECK THE CARD.

An error has occurred while accessing the
SD card.

≥

Check the SD card.

COPY FAILED DUE TO
ERROR ON SD CARD.

This is displayed when an attempt to
access the SD card in this unit fails.

CARD LOCKED.

The write-protect switch of the copy
destination SD card is locked.

≥

Unlock the write-protect switch of the
SD card.

AG-MDR25PJ.EJ(DVQP1328ZA)_E.book 237 ページ２０１７年５月２２日　月曜日　午後６時１４分

«
...
235
236
237
238
239
...
»

Summary of Contents for POVCAM AG-MDR25E






































































































































































































































































Reviews:

No comments

Related manuals for POVCAM AG-MDR25E

Brand: Magnavox Pages: 2

Brand: JVC Pages: 116

Brand: JVC Pages: 116

Brand: JVC Pages: 93

Brand: JVC Pages: 85

Brand: JVC Pages: 92

Brand: JVC Pages: 4

Brand: JVC Pages: 92

Brand: JVC Pages: 498

DRMV78B - DVDr/ VCR Combo

Brand: JVC Pages: 2

Brand: Panasonic Pages: 90

Brand: Uqique Pages: 1

Brand: Eltrinex Pages: 34

Brand: Daewoo Pages: 43

Brand: LaPazz Pages: 62

Brand: Lawmate Pages: 2

Brand: Olympus Pages: 128

Brand: Panasonic Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands