Panasonic POVCAM AG-MDR25E Operating Instructions Manual Download

Page: 36 / 261

- 36 -

Menu setting by touch screen operation

Press the MENU button

Touch the top menu

Touch the submenu

≥

Next (Previous) page can be displayed by touching

Touch the desired item to enter the setting.

Touch [EXIT] to exit the menu setting.

How to use the touch screen

You can operate by directly touching the LCD monitor (touch screen) with your finger.

∫

Touch

Touch and release the touch screen to select icon or picture.

≥

Touch the center of the icon.

≥

Touching the touch screen will not operate while you are touching
another part of the touch screen.

∫

Slide while touching

Move your finger while pressing on the touch screen.

∫

About the operation icons

Touch when changing a page or performing settings.

[RETURN]:
Returns you to the previous screen.

≥

Do not touch the LCD monitor with hard pointed tips, such as ball point pens.

ヮユワヶ

AG-MDR25PJ.EJ(DVQP1328ZA)_E.book 36 ページ２０１７年５月２２日　月曜日　午後６時１４分

Summary of Contents for POVCAM AG-MDR25E






































































































































































































































































Search results

Summary of Contents for POVCAM AG-MDR25E

Reviews:

Related manuals for POVCAM AG-MDR25E

Brands by name

Popular brands

Panasonic POVCAM AG-MDR25E, Operating Instructions Manual

Search results

Summary of Contents for POVCAM AG-MDR25E

Reviews:

Related manuals for POVCAM AG-MDR25E

Brands by name

Popular brands