Panasonic POVCAM AG-MDR25E Operating Instructions Manual Download

Page: 234 / 261

- 234 -

Major confirmation/error messages to be indicated on the screen in text.

Display

Messages

During recording/playback

Display

Description

Behavior and cause

CHECK CARD.

The SD card is not supported by this unit.

≥

Check the SD card.

This card cannot record
clips.

This is displayed when the SD card has a
capacity of less than 4 GB.

≥

Use an SD card with a capacity of 4 GB
or more.

INCOMPATIBLE CARD.
CHECK CARD SPEED.

This is displayed if the maximum writing
speed of the SD card is not fast enough.

≥

The operation will continue.

≥

Use an SD card with a maximum writing
speed that is fast enough.

CANNOT BE USED DUE
TO INCOMPATIBLE
DATA.

The SD card cannot be used with this unit.

≥

Insert a recordable SD card.

Cannot be used due to
incompatible data. Use
another card.

CANNOT RECORD
- INCOMPATIBLE
CONTROL DATA.

The content versions do not match. This is
displayed when the SD card contains clips
recorded with another device, for
example.

≥

Match the device and content version.

REC STOPPED. NOW
WRITING.

This is displayed when the SD card is
removed during recording or data cannot
be written to the SD card correctly.

≥

Check the SD card.

ERROR OCCURRED.
PLEASE TURN UNIT OFF,
THEN TURN ON AGAIN.

This is displayed if the SD card is
removed or writing to the SD card fails
while recording is in progress.
It is also displayed when the lens of the
Camera Head does not move.

≥

Check the SD card.

≥

Turn off and on this unit, and then check
to see if the lens moves.

Cannot record.
The number of clips has
exceeded the maximum
limit.

No additional clips can be recorded to the
SD card.

≥

Delete unnecessary clips, or use a new
SD card.

CANNOT RECORD
- DATE CAPACITY IS
FULL.

This is displayed when you try to record in
excess of the maximum number of clips
allowed for one SD card.

≥

The operation will stop.

≥

Replace the SD card or delete
unnecessary clips.

Cannot record
- Playlist capacity is full.

INVALID

This is displayed when the operation is
invalid.

≥

Before performing the operation, wait
until this unit is ready for it.

AG-MDR25PJ.EJ(DVQP1328ZA)_E.book 234 ページ２０１７年５月２２日　月曜日　午後６時１４分

Summary of Contents for POVCAM AG-MDR25E






































































































































































































































































Search results

Summary of Contents for POVCAM AG-MDR25E

Reviews:

Related manuals for POVCAM AG-MDR25E

Brands by name

Popular brands

Panasonic POVCAM AG-MDR25E, Operating Instructions Manual

Search results

Summary of Contents for POVCAM AG-MDR25E

Reviews:

Related manuals for POVCAM AG-MDR25E

Brands by name

Popular brands